26
Local UI Alerts
System Administrators can set up the local UI to warn users that the scan disk is running low on memory,
potentially impacting system performance and/or causing job loss.
To Set up the Local UI Alert
At your Workstation
1. Open your Web Browser and enter the TCP/IP address of the machine in the Address or Location field
and press [Enter]. Your Browser will display the machine Home Page.
2. Click the [Properties] tab.
3. Enter the Administrator User name and password if prompted. The default is [admin] and [1111].
4. Click the symbol to the left of [General Setup].
5. Click the symbol to the left of [Alert Notification].
6. Select [Local UI Alerts] in the directory tree.
7. Select the radio button corresponding to the warning that you wish to provide.
8. Click [Apply] to accept the changes or [Undo] to return the settings to their previous values.
To Next Page
Loading...
