34
Online / Offline
The Online/Offline window allows the System Administrator to stop and resume the system from receiving
or sending jobs over the network.
At the Machine
1. Press the [Log In / Out] button to enter the Tools pathway.
2. On the keypad enter [admin], then [1111] or the current password. Touch the [Enter] button when
finished.
3. Touch [Machine Status], then the [Tools] tab.
4. Touch [Connectivity and Network Setup].
5. Touch [General], then touch [Online/Offline].
6. To stop the machine receiving or sending jobs over the network touch the [Offline] button. Any installed
optional features using the network (eg: Network Scanning) will not be available until the machine is
set to Online.
To enable the machine to receive or send jobs over the network touch the [Online] button.
7. Touch the [Close] button.
8. Touch [Log In / Out] to exit the Tools pathway.
To Next Page
Loading...
