How to fix paper stacking issues in Xerox All in One Printer?
If paper delivered to an output tray is not properly stacked up on your Xerox All in One Printer, try flipping over the paper stack in the paper tray, or rotate it head to toe.
What to do if Xerox All in One Printer document feeder not working?
If the document is not feeding through the document feeder on your Xerox All in One Printer, make sure that the document feeder is not overloaded. It can hold a maximum of 50 sheets. Also, check that the document is fully inserted into the document feeder.
What to do if Xerox All in One Printer cannot store document due to full memory?
If you cannot store a document for secure polling on your Xerox All in One Printer due to full memory, cancel the operation and try again later when additional memory is available.
What to do if my Xerox All in One Printer displays a memory full error message?
If your Xerox All in One Printer displays a memory full error message: * Check with the Key Operator about available memory. * Divide the remaining pages of the job into several small jobs and run the job again.
How to prevent paper curling in Xerox All in One Printer?
To prevent paper curling in your Xerox All in One Printer, ensure that the paper is loaded correctly. Load paper in Trays 1, 2, 3, and 4 with the seam side up. Load paper in the Tandem Tray Module and bypass tray with the seam side down. Load custom media in the bypass tray.
Why is the Finisher/Stapler option missing on my Xerox All in One Printer?
If the Finisher/Stapler option is not displayed on your Xerox All in One Printer, check that the cables from the finisher are securely connected to the machine. Also, ensure that the Finisher is correctly positioned. The machine automatically configures itself when additional options are attached.
How to prevent deformed transparencies with Xerox All in One Printer?
To prevent deformed transparencies when using your Xerox All in One Printer, ensure that [Transparency] is selected in [Paper Type]. This setting allows the machine to automatically adjust for different media types, as transparencies tolerate less heat than paper.
How to fix uneven print quality on Xerox All in One Printer?
To fix uneven print quality on your Xerox All in One Printer, try replacing the drum cartridge. If the screen displays a message for replacement, replace the toner cartridge as well.
How to adjust print darkness on Xerox All in One Printer?
If the output from your Xerox All in One Printer is too light or too dark, try loading fresh paper and check the quality of the original document. You can also select the Lighten/Darken option on the touch screen. Run off more prints to see if the copy quality improves. If the issue persists, consider replacing the drum cartridge.
How to resolve a tray fault on Xerox All in One Printer?
To resolve a tray fault on your Xerox All in One Printer: 1. Open the paper tray. 2. Move the paper tray guides away from the paper. 3. Move the paper tray guides against the paper so that they are just touching the paper. 4. Power the machine off and then on.
General| Printing Technology | Laser |
|---|---|
| Max Printing Resolution (B/W) | 600 x 600 dpi |
| Print Resolution | 600 x 600 dpi |
| Max Copying Resolution (B/W) | 600 x 600 dpi |
| Copy Resolution | 600 x 600 dpi |
| Scan Resolution | 600 x 600 dpi |
| Fax Transmission Speed | 33.6 Kbps |
| Weight | 178.6 lbs |
| Functions | Copier, Fax, Printer, Scanner |
| Supported Media Type | Plain, Label, Envelope, Transparency |
| Interface | USB, Parallel |
| Connectivity | USB, Parallel |
| Supported Operating Systems | Windows |
To Next Page
