10 Maintenance
118 Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128 Quick Reference Guide
2. Hold the staple cartridge by its
lever as shown in the diagram,
and move the staple cartridge to
the right towards you.
3. Lift up to remove the staple
cartridge.
4. Press in both sides of the staple
cartridge marked PUSH so that
the cartridge case will rise up.
NOTE: If there are still staples inside
the staple case, the case will not rise
up.
5. Insert your fingertip into the
round section on the cartridge to
remove the staple case.
To Next Page
Loading...
Need help?
General
