EasyManuals Logo

Xerox WorkCentre Pro 128 Quick Reference Guide

Xerox WorkCentre Pro 128
154 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #74 background imageLoading...
Page #74 background image
4 Fax/Internet Fax
72 Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128 Quick Reference Guide
Mixed Size Originals feature. For more information, refer to Mixed Size Originals on
User Guide.
1. Load documents face up into the
document feeder or face down
on the document glass.
NOTE: The long fax document scan feature has the following limitations.
Only available when using the document feeder.
Allows you to scan up to 600 mm (23.62 inches) in length.
Not available in the duplex mode.
NOTE: In both simplex and duplex modes, scanning a document at its original size or
smaller is recommended. An enlarged image may be cut off during transmission.
2. Select the Features
The features available on the [Basic Features] screen are those used most often.
NOTE: Only those features relevant to the machine configuration will be available.
1. Press the <All Services> button
on the control panel.
2. Select [Fax/Internet Fax] on the
touch screen. Ensure that the
[Basic Features] screen is
displayed.
NOTE: If the Authentication feature
is enabled, you may be required to
enter the user ID and password (if
one is set up). If you need assistance, contact the Key Operator.
3. Press the <Clear All> button once on the control panel to cancel any previous
selections.
<Clear All> button<All Services> button

Table of Contents

Other manuals for Xerox WorkCentre Pro 128

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox WorkCentre Pro 128 and is the answer not in the manual?

Xerox WorkCentre Pro 128 Specifications

General IconGeneral
BrandXerox
ModelWorkCentre Pro 128
CategoryAll in One Printer
LanguageEnglish

Related product manuals