3
· Please use this product in accordance with the instructions in the user manual. Users are responsible for
any loss or damage arising from improper use of this product.
Batteries and Charging
WARNINGS:
· Do not use any third-party battery, cord set, or omni station. The robot vacuum can only be used with the
model JZ2302 omni station.
· No action needed from users to shift the omni station between 50 Hz and 60 Hz, and the product can
adapt itself for both 50 Hz and 60 Hz.
· Do not dismantle, repair, or modify the battery or the omni station on your own.
· Do not place the omni station near a heat source.
· Do not use a wet cloth or wet hands to wipe or clean the omni station's charging contacts.
· If the robot vacuum will not be used for an extended period, fully charge it, then turn it off and store in a cool,
dry place. Recharge the robot vacuum at least once every 3 months to avoid over-discharging the battery.
· Do not expose the appliance or battery to excessive temperatures.
· Be aware of the risk of terminals of the battery-operated appliance or battery being short-circuited by
metal objects.
To Next Page