XIEGU X108 - Page 9

9 / 12
desired power setting and press [POW] to exit.
3.3.13: Switching between Frequency Mode / Channel Mode
Press the frequency knob to switch the current menu page, then press [V/M].
Press this function key to move between frequency mode and channel mode.
3.3.14: Move current channel to VFO
Press the frequency knob to switch the current menu page, then press [M>V].
The radio will switch to VFO mode, showing information from the current channel.
3.3.15: Save current settings to Memory
Press the frequency knob to switch the current menu page, then press [V/M] to choose
channel mode. Turn the frequency knob until “BLANK” is highlighted.
Press [V/M] to return to frequency mode. Adjust frequency, operating mode and other
parameters desired, then press [MW] to write this information to memory.
3.3.16: Delete the current channel
Press the frequency knob to switch the current menu page, then press [MC] to clear the
information stored in the current channel.
3.3.17: Manual / automatic telegraph key
Press the frequency knob to switch the current menu page, then press [KEY].
Choose Manual Key, Automatic Left Hand telegraph key or Automatic Right Hand telegraph
key.
3.3.18: Automatic telegraph key rate
Press the frequency knob to switch the current menu page, then press [KSPD].
Turn the frequency knob to set the automatic key rate.
3.3.19: Set the local time
Press the frequency knob to switch the current menu page, then press [TIME].