IMPORTANT! The installaon packages referenced here are being updated regularly and the le
names frequently change. If you copy and paste any commands from this user guide, be sure to update
the placeholders in those commands to match the downloaded packages.
IMPORTANT! Les packages d'installaon référencés ici sont mis à jour régulièrement et les noms de
chier changent fréquemment. Si vous copiez et collez des commandes de ce guide, veillez à mere à
jour les espaces réservés dans ces commandes pour qu'ils correspondent aux packages téléchargés.
Wichg! Die hier genannten Installaonspakete werden regelmäßig aktualisiert und die Dateinamen
ändern sich häug. Wenn Sie Befehle aus diesem Benutzerhandbuch kopieren und einfügen, müssen
Sie die Platzhalter in diesen Befehlen entsprechend den heruntergeladenen Paketen aktualisieren.
1. Download both the Xilinx
®
runme (XRT) and deployment shell installaon packages
associated with your card from the Geng Started tab in one of the following locaons:
• Alveo U200 Product Page
• Alveo U250 Product Page
• Alveo U280 Product Page
2. Install the XRT installaon package using the following command, where <deb-dir> is the
directory where the DEB packages were downloaded in the previous step and <version> is
the laer part of the XRT le name.
$ sudo apt install <deb-dir>/xrt_<version>.deb
This will install the XRT along with any necessary dependencies. Follow the instrucons
when prompted throughout the installaon.
3. Install the deployment shell installaon packages required for the card.
• For U200:
$ sudo apt install <deb-dir>/xilinx-u200-xdma-<version>.deb
• For U250:
$ sudo apt install <deb-dir>/xilinx-u250-xdma-<version>.deb
• For U280:
$ sudo apt install <deb-dir>/xilinx-u280-es1-xdma-<version>.rpm
The deployment soware sources are now installed and deployed on the system. The
installaon of the drivers, runme soware, and ulies are in the /opt/xilinx/ directory
and contains the xrt and dsa sub-directories. Note that the dsa folder contains the
deployment shell installaon.
Chapter 4: Installing the Deployment Software
UG1301 (v1.3) February 12, 2019 www.xilinx.com
Getting Started with Alveo Accelerator Cards 24