Xilinx Alveo U250

Capabilities: [100] Advanced Error Reporting
Capabilities: [400] Access Control Services
Capabilities: [410] #15
Kernel driver in use: xocl_xdma
Kernel modules: xocl
• For U280 ES:
65:00.0 Serial controller: Xilinx Corporation Device 5009 (prog-if 01
[16450])
Subsystem: Xilinx Corporation Device 000e
Flags: bus master, fast devsel, latency 0, IRQ 191, NUMA node 0
Memory at de000000 (32-bit, non-prefetchable) [size=32M]
Memory at e0000000 (32-bit, non-prefetchable) [size=128K]
Capabilities: [40] Power Management version 3
Capabilities: [60] MSI-X: Enable+ Count=33 Masked-
Capabilities: [70] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Capabilities: [1c0] #19
Capabilities: [1f0] Virtual Channel
Capabilities: [e00] Access Control Services
Kernel driver in use: xocl_xdma
Kernel modules: xocl
65:00.1 Serial controller: Xilinx Corporation Device 5008 (prog-if 01
[16450])
Subsystem: Xilinx Corporation Device 000e
Flags: fast devsel, NUMA node 0
Memory at dc000000 (32-bit, non-prefetchable) [size=32M]
Memory at e0020000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [40] Power Management version 3
Capabilities: [60] MSI-X: Enable- Count=33 Masked-ss
Capabilities: [70] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Capabilities: [e00] Access Control Services
Kernel driver in use: xclmgmt
Kernel modules: xclmgm
Note: For deployment shells earlier than 2018.3, User PF is assigned to funcon 0 and Management PF is
assigned to funcon 1.
Running xbutil flash scan
Use the xbutil flash scan command to view and validate the card's current rmware
version, as well as display the installed card details, including card ID, shell name, and mestamp.
1. Enter the following command:
$ sudo /opt/xilinx/xrt/bin/xbutil flash scan
Chapter 5: Card Bring-Up and Validation
UG1301 (v1.3) February 12, 2019 www.xilinx.com
Getting Started with Alveo Accelerator Cards 36
Send Feedback