Xilinx Alveo U250 Getting Started Guide

The shell name is xilinx_u200_xdma_201830_1.
• Timestamp (-t):
DSA package installed in system:
xilinx_u200_xdma_201830_1,[TS=0x000000005bece8e1],[BMC=3.1]
The mestamp is 0x000000005bece8e1.
For the example output above, the xbutil flash command is:
sudo /opt/xilinx/xrt/bin/xbutil flash -a xilinx_u200_xdma_201830_1 -t
0x000000005bece8e1 -d 0
When the Alveo card is successfully ashed, the xbutil flash scan output will show the
same package informaon for both DSA package installed in FPGA: and DSA package
installed in system:.
IMPORTANT! Use a separate xbutil flash command to ash each card in the system.
Appendix C: Generating the xbutil flash Command
UG1301 (v1.3) February 12, 2019 www.xilinx.com
Getting Started with Alveo Accelerator Cards 48
Send Feedback

Xilinx Alveo U250 Specifications

General

Brand	Xilinx
Model	Alveo U250
Category	Computer Hardware
Language	English