30 www.xilinx.com AC701 Getting Started Guide
UG967 (v3.0) July 10, 2013
Advanced Bring-up with Base Targeted Reference Design
After installing the driver, the control and monitoring user interface appears as shown in
Figure 24. The control view shows control parameters such as test mode (loopback,
generator, or checker) and packet length. The system monitor tab shows system power and
temperature. The GUI also provides an LED indicator for DDR3 memory calibration.
X-Ref Target - Figure 24
Figure 24: Artix-7 FPGA Base TRD Control and Monitoring Interface
To Next Page
Loading...
