Xilinx Artix-7 FPGA AC701 - Basic Hardware Bring-up with Built-In Self-Test; Introduction and Setup

AC701 Getting Started Guide www.xilinx.com 7
UG967 (v3.0) July 10, 2013
Basic Hardware Bring-up with Built-In Self-Test
Basic Hardware Bring-up with Built-In Self-Test
Introduction
The BIST tests many of the features offered by the Artix-7 FPGA AC701 Evaluation Kit.
The test is an available reference design for the AC701 Evaluation Kit and can be
programmed into the FPGA via the JTAG interface.
Figure 2 and Table 1 provide an overview of the board features utilized by the BIST and the
AMS101 evaluation card.
X-Ref Target - Figure 2
Figure 2: AC701 Board Detail
UG967_02_040913
6
2
7
16
3
5
4
9
11
12
13
8
15
10
14
1
Tabl e 1 : AC701 Board Features
Callout Component Description
1 SW1 Configuration Mode DIP Switch
2 Digilent JTAG connector
3 RJ45 Ethernet connector
4XADC header
5 DDR3 external memory
6 LCD display
7 Rotary switch (under LCD)
8 Status LEDs and user LEDs
9 CPU reset button