Step 4: Click on “Flash”, Double Click on Program, select OK. If the programming is successful, a conrmation message will be displayed.
8. Technical Specifications
Parameter * Value Unit
Basic Specications
Number of GPIOs 70
Number of LEDs 8
Number of Switches 4
On-board oscillator frequency (FXO-HC536R) 100 MHz
SPI Flash Memory (M25P16) 16 Mb
Power supply voltage (USB or external) 5 - 7 V
FPGA Specications
Internal supply voltage relative to GND –0.5 to 1.32 V
Auxiliary supply voltage relative to GND –0.5 to 3.75 V