EasyManua.ls Logo

Xilinx Spartan-3E User Manual

Xilinx Spartan-3E
164 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
R
Spartan-3E Starter Kit
Board User Guide
UG230 (v1.0) March 9, 2006
Click a component to jump to the
related documentation. Not all
components have active links.

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Xilinx Spartan-3E and is the answer not in the manual?

Xilinx Spartan-3E Specifications

General IconGeneral
BrandXilinx
ModelSpartan-3E
CategoryMotherboard
LanguageEnglish

Summary

Chapter 1: Introduction and Overview

Key Components and Features

Details the main hardware components and features of the Spartan-3E Starter Kit board.

Chapter 2: Switches, Buttons, and Knob

Chapter 3: Clock Sources

Chapter 4: FPGA Configuration Options

Programming the FPGA, CPLD, or Platform Flash PROM via USB

Details programming the board via JTAG using the on-board USB interface.

Generating the FPGA Configuration Bitstream File

Explains generating the bitstream file and setting configuration clock rate.

Chapter 6: VGA Display Port

Signal Timing for a 60 Hz, 640x480 VGA Display

Explains VGA system and timing information for a 640x480 display.

Chapter 10: Analog Capture Circuit

Programmable Pre-Amplifier

Details the pre-amplifier's function, interface, and programmable gain settings.

Analog to Digital Converter (ADC)

Describes the LTC1407A-1 ADC and its interface.

Chapter 11: Intel StrataFlash Parallel NOR Flash PROM

StrataFlash Connections

Details the FPGA-to-StrataFlash connections and shared signals.

Chapter 12: SPI Serial Flash

Chapter 13: DDR SDRAM

DDR SDRAM Connections

Details the FPGA pin connections to the DDR SDRAM.

UCF Location Constraints

Provides UCF constraints for DDR SDRAM address, data, and control pins.

Chapter 14: 10/100 Ethernet Physical Layer Interface

Chapter 16: XC2C64A CoolRunner-II CPLD

Related product manuals