Xilinx VC707 - Appendix A: Default Switch and Jumper Settings; GPIO DIP Switch SW2

References
IP Integrator Documentation
– Vivado Design Suite Tcl Command Reference Guide – UG835
• http://www.xilinx.com/support/documentation/sw_manuals/xilinx2015_1/
ug835-vivado-tcl-commands.pdf
– Designing IP Subsystems Using IP Integrator – UG994
• http://www.xilinx.com/support/documentation/sw_manuals/xilinx2015_1/
ug994-vivado-ip-subsystems.pdf
7 Series Configuration
– 7 Series FPGAs Configuration User Guide
• http://www.xilinx.com/support/documentation/user_guides/
ug470_7Series_Config.pdf