VC7203 IBERT Getting Started Guide www.xilinx.com 21
UG847 (v4.0) November 6, 2013
Running the GTX IBERT Demonstration
5. To view the GTX transceiver operation, click Layout > Serial I/O Analyzer. In the
Links window, right-click and select Create Links... or press the Create Links button.
The Auto-detect links button can also be used to have the tools automatically scan for
any links that are connected and currently linked (Figure 1-17).
6. If Create Links was selected, a pop up window displays. In this window you can link
any TX to RX GT transceivers. To create links, select the TX GT and RX GT from the
two lists, then press the Add (+) button. For this project, connect the following links:
MGT_X1Y8/TX to MGT_X1Y8/RX
MGT_X1Y9/TX to MGT_X1Y9/RX
MGT_X1Y10/TX to MGT_X1Y10/RX
MGT_X1Y11/TX to MGT_X1Y11/RX
X-Ref Target - Figure 1-17
Figure 1-17: Serial I/O Analyzer - Create Links...
To Next Page
Loading...
