20 www.xilinx.com VC7203 IBERT Getting Started Guide
UG847 (v4.0) November 6, 2013
Chapter 1: VC7203 IBERT Getting Started Guide
Drag these signals from the Debug Probes window to the VIO Probes window
(Figure 1-16).
Note:
The ROM address values for the Si5368 and Si570 devices (that is, si5368_addr[6:0]
and si570_addr[6:0]) are preset to 60 to produce an output frequency of 156.250 MHz. Entering
a different ROM address changes the reference clock(s) frequency. The complete list of
pre-programmed SuperClock-2 frequencies and their associated ROM addresses is provided in
Table 1-2, page 24.
X-Ref Target - Figure 1-16
Figure 1-16: SuperClock-2 Module VIO Core
To Next Page
Loading...
