Xilinx Virtex-7 FPGA VC7203 Characterization Kit IBERT - Page 39

VC7203 IBERT Getting Started Guide www.xilinx.com 39
UG847 (v4.0) November 6, 2013
Creating the GTX IBERT Core
17. In the Flow Navigator under Program and Debug, click Generate Bitstream
(Figure 1-33). A window pops up asking if it is ok to launch implementation. Click
Yes.
18. When implementation completes, navigate to the project directory and locate the
resultant bitstream here:
\ibert_7series_gtx_0\example_project\ibert_7series_gtx_0_exampl
e\ibert_7series_gtx_0_example.runs\impl_1\.
X-Ref Target - Figure 1-33
Figure 1-33: Generate Bitstream
8*BFBB
Send Feedback