Xilinx Zynq-7000

Chapter 1: Introduction
14 www.xilinx.com ZC702 and ZVIK Getting Started Guide
UG926 (v6.0) December 17, 2013
HDR_1 X 3
J27 PS_SRST_B
1-2 1
J28 PS_POR_B
1-2 1
J30 Ethernet PHY HDR
1-2 7
J31 Ethernet PHY HDR
NONE 7
J32 Ethernet PHY HDR
NONE 7
J33 USB 2.0 Mode
2-3 6
J34 USB 2.0 J1 ID SEL
1-2 7
J35 USB 2.0 J1 VBUS CAP SEL
1-2 6
J36 USB 2.0 J1 GND SEL
1-2 7
J37 XADC_VREP SEL
1-2 2
J38 XADC_VCC SEL
2-3 2
J70 XADC_VREF Source SEL
2-3 2
Table 1-2: Default Jumper Settings (Cont’d)
Jumper Function Default Position
Figure 1-4
Callout
Send Feedback