ZC702 and ZVIK Getting Started Guide www.xilinx.com 7
UG926 (v6.0) December 17, 2013
Chapter 1
Introduction
Overview
The Zynq®-7000 All Programmable SoC (AP SoC) ZC702 evaluation kit shown in Figure 1-1
is based on the XC7Z020 CLG484-1 AP SoC. For additional information, see the Zynq-7000
AP SoC Product Table [Ref 1]. A built-in self-test (BIST) is provided for the ZC702 evaluation
kit. The BIST provides a convenient way to test many of the board's features on power-up.
The tutorials and reference designs available on the Zynq-7000 AP SoC ZC702 Evaluation Kit
documentation page can be used to further explore the capabilities of the ZC702 board and
the Zynq-7000 AP SoC.
TIP: For the most up-to-date information on the content provided with the ZC702 evaluation kit, see
the Zynq-7000 AP SoC ZC702 Evaluation Kit product page
. Zynq-7000 All Programmable SoC:
Concepts, Tools, and Techniques (UG873) [Ref 2] shows the basic hardware and software flow using the
ZC702 board. The Zynq-7000 AP SoC documentation page is also helpful.
X-Ref Target - Fi gure 1-1
Figure 1-1: ZC702 Evaluation Kit
To Next Page
Loading...
Need help?
General
