2
1 Checking Product and Part Names
1-1．Checking Products on Delivery
Use the following checklist when products are delivered.
Are the delivered products the ones
that were ordered?
Check the model numbers marked on the nameplates of the
servomotor and servo drive.
Does the servomotor shaft rotate
smoothly?
The servomotor shaft is normal if it can be turned smoothly
by hand. Servomotors with brakes, however, cannot be
turned manually.
Check the overall appearance, and check for damage or
scratches that may have occurred during shipping.
Are there any loose screws?
Check screws for looseness using a screwdrive.
Is the motor code the same with the
code in drive?
Check the motor code marked on the nameplates of the
servomotor and the parameter F0-00 on the servo drive.
If any of the above is faulty or incorrect, contact Xinje or an authorized distributor.
1-2．Product appearance and name rule
DS2-2□P□-AS/AS6 DS2-20P4-BS/BS6 DS2-20P7-BSW/BSW6 DS2-21P5-AS2
DS2-4□P□-AS/AS6
(1) Appearance and nameplate
To Next Page
Loading...
