Need help?Do you have a question about the Xinje DS2 series and is the answer not in the manual?
General| Control Mode | Position, Speed, Torque |
|---|---|
| Installation Altitude | Below 1000m |
| Category | Servo Drive |
| Output Power | 0.1kW to 7.5kW |
| Communication Interface | RS485, CANopen |
| Encoder Feedback | 17-bit absolute encoder |
| Protection Features | Overvoltage, Undervoltage, Overcurrent, Overload, Overtemperature, Encoder fault |
| Ambient Temperature | 0°C to 55°C |
| Storage Temperature | -20°C to +65°C |
| Vibration Resistance | 5.9 m/s² |
| Shock Resistance | 19.6 m/s² |
| Cooling Method | Natural cooling or forced air cooling |
| Series | DS2 series |
To Next Page
