Xinje DS2 series User Manual

29
4-4-1．Check System Infomation
Press STATUS/ESC to switch to the auxiliary function mode. Set the group No. to 0 to
check system information. Press INC or DEC key to select different No., and press and
hold ENTER key to check current information. Press STATUS/ESC key to return.
The following table describes the meaning of each No.
Function
No.
Description
Functio
n
No.
Description
F0
-
00
Motor Code
F0
-
01
Servo Series
F0
-
02
Servo Model
F0
-
03
Prod
uce
Date: Year
F0
-
04
Prod
uce
Date: Month
F0
-
05
Prod
uce
Date: Day
F0
-
06
Software Version
F0
-
07
Hardware Version
4-4-2. Auxiliary Run Mode
Press the STATUS/ESC key to select the auxiliary function mode. Set the group No. to 1.
Press INC or DEC key to select different No., and press and hold ENTER key to use
current function. Press STATUS/ESC key to return.
1. Jog (F1-00)
Make sure that the motor shaft is not connected to the machine before jogging!
Press ENTER to power on the motor (servo on). Press INC for forward jogging, press
DEC for reverse jogging. Press STATUS/ESC key to power off the motor (servo off), and
press STATUS/ESC key again to return.
4 different states of jogging:
State
Panel Display
State
Panel Display
Idle
Forward
Jogging
Servo ON
Reverse
Jogging
Set the related parameters:
P3
-
04
JOG
speed
Unit
Default
Setting range
Suitab
le mode
Change
Effective
Rpm
100
0~500
JOG
Servo
OFF
I
mmediately
2. Trial Operation (F1-01)
Make sure that the motor shaft is not connected to the machine before trial
operation!
When servo driver is connected with non-original encoder line or power line, trial
operation must be run first to ensure that the encoder line or power line is connected
correctly.
Set the display value to 1, and press and hold ENTER key to enter trial operation mode.
The operate panel displays:

Xinje DS2 series Specifications

General

Brand	Xinje
Model	DS2 series
Category	Servo Drives
Language	English