EasyManua.ls Logo

Xinje DS3E Series

Xinje DS3E Series
152 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
DS3/DS3E/DS3L series servo drive
User manual
WUXI XINJE ELECTRIC CO., LTD.
Serial No. SC3 02 20171010 1.0

Table of Contents

Other manuals for Xinje DS3E Series

Question and Answer IconNeed help?

Do you have a question about the Xinje DS3E Series and is the answer not in the manual?

Xinje DS3E Series Specifications

General IconGeneral
BrandXinje
ModelDS3E Series
CategoryServo Drives
LanguageEnglish

Summary

Safety Precautions

Checking Products upon Delivery

Verify delivered products against order details and check for damage.

Installation

Guidelines and precautions for installing the servo drive and motor.

Wiring

Safety precautions and guidelines for electrical wiring.

Operation

Safety guidelines to be followed during operation.

1 Checking Product and Part Names

1-1 Checking Products on Delivery

Verify delivered items match order and are free from damage.

2 Installations

3 Wiring

3-1 DS3-PQA series

Wiring specifications and examples for the DS3-PQA series.

4 Use the operate panel

5 Run the servo system

5-1 Control mode selection

Details on selecting different control modes for the servo system.

6 Servo gain adjustment

6-1 Gain parameter adjustment

Adjusting parameters for speed, position, and torque loops.

8 Alarm Information

E-XX Alarm Code Format

Explanation of alarm code structure and categories.

Appendix 1 Parameter list

Appendix 4 Modbus address

Appendix 5 General debug steps

1. The motor without load, test run

Steps for initial open-loop and jog test runs.

Related product manuals