Wireless Access Point
Configuring the Wireless AP 179
on Bondx is passed on to the onboard processor as well as out Bondy. All
traffic received on Bondy is passed on to the onboard processor as well as
out Bondx. This allows a network analyzer to be plugged into Bondy to
capture traffic for troubleshooting, while the bonded ports provide
network connectivity for data traffic.
If each bond contains just one port, then you have the simple case of one
port mirroring another.
Figure 105. Mirroring Traffic
7. When done configuring bonds and bridging as desired, click the Save
button if you wish to make your changes permanent.
See Also
Interfaces
DNS Settings
Network
Network Statistics
Spanning Tree Status
To Next Page
Loading...
