Wireless Access Point
The Command Line Interface 489
ssid
The ssid command [MyAP(config-ssid)#] is used to establish your SSID
parameters.
Command Description
add Add an SSID.
FORMAT:
ssid add [newssid]
del Delete an SSID.
FORMAT:
ssid del [oldssid]
edit Edit an existing SSID.
FORMAT:
ssid edit [existingssid]
reset Delete all SSIDs and restore the default SSID.
FORMAT:
ssid reset
stations Set station limit for this SSID.
traffic Set traffic limits for this SSID
To Next Page
Loading...
