Wireless Access Point
212 Configuring the Wireless AP
SOCKS, an FQDN is not allowed—an IP address is required. The default
Port settings are standard defaults for these ports.
3. Username/Password: For each proxy client, if the proxy server requires
authentication, enter the Username and Password here.
4. SOCKS 4/ SOCKS 5: Select the version of SOCKS in use on your proxy
server. The default is SOCKS 5.
5. Socks Network Whitelist: Enter a whitelist of subnetworks that must not
be proxied. Specify each subnet by entering its Network address and its
subnet Mask, then click Add. At the least, create entries for the loopback
address and the subnet where the proxy server lives. You should also
enter subnets that include your DNS servers and authentication servers.
To Next Page
Loading...
