Wireless Access Point
486 The Command Line Interface
ping Execute ping utility.
FORMAT:
run-tests ping [host-name | ip-addr]
quick-config Apply quick configuration template.
quit Exit the command line interface.
radius-ping Special ping utility to test the connection to a
RADIUS server.
FORMAT:
run-tests radius-ping [external | ssid <ssidnum>]
[primary | secondary] user <raduser> password
<radpasswd> auth-type [CHAP | PAP]
run-tests radius-ping [internal | server
<radserver> port <radport> secret <radsecret> ]
user <raduser> password <radpasswd>
auth-type [CHAP | PAP]
You may select a RADIUS server that you have
already configured (ssid or external or internal) or
specify another server.
restore Restore to previous saved configuration.
revert Revert to saved configuration after delay if
configuration is not saved.
save Save running configuration to flash.
search Search show command output for pattern.
show Display current information about the selected item.
site-survey Enable or disable site survey mode.
FORMAT:
run-tests site-survey [on | off | enable | disable]
Command Description
To Next Page
Loading...
