XP0100 Enterprise IP Phone Customizing Your Phone
Xorcom Ltd. 17 www.xorcom.com
2) Select the desired ring tone from the pull-down list of Ring Tones.
3) Click Confirm to save the change.
Note:
You can delete a ring tone by selecting the desired one from the pull-down list of Ring
Tones and clicking the Del key. The ring tone file of system cannot be deleted.
To specify ring tone for account via web user interface:
1) Click on Account->Basic.
2) Select the desired ring tone from the pull-down list of Ring Tones.
3) Click Confirm to save the change.
To upload a ring tone via web user interface:
1) Click on Phone->Preference.
2) Scroll to Upload Ringtone field.
3) Click Browse to select a ring tone file from your local system.
4) Click Upload to upload the file.
5) Click Confirm to save the change.
Note:
1. The ring tone file format must be in 16bits WAV format (via Ulaw Compression), 8K
sample rate (monophony).
2. Blank or other special characters cannot be included in the file name.
3. The size of the ring tone file cannot exceed 100K.
Codec Selection
The IP phone supports the following audio codecs:
G722, G723-53, G723-63, G726-16, G726-24, G726-32, G726-40, G729, PCMU and
PCMA.
You can enable or disable the desired codecs via web user interface. Contact your
system administrator for more information about the codecs.
To enable/disable the codecs via web user interface:
1) Click on Account->Codecs.
2) Highlight the desired codec in the Disable codecs list or Enable codecs list, and
click or to move to the other list.
3) Click Confirm to save the change.
Note:
1. Codec Selection can only be configured via web user interface.
2. If codec G722 is negotiated, the LCD screen prompts call in process with HD voice.
To Next Page
Loading...
