XP0100 Enterprise IP Phone Using the Advanced Phone Functions
Xorcom Ltd. 41 www.xorcom.com
To update the firmware manually via web user interface:
1) Click on Phone->Upgrade.
2) Scroll to Select and Upgrade Firmware field, and click Browse to select a
firmware file on your local system.
3) Click Upgrade to update the firmware.
Please do not power off during the updating process.
To update the firmware automatically via web user interface:
1) Click on Phone->Auto Provision.
2) Configure the relating settings: PNP Active, DHCP Active, Custom Option,
Server URL, Common AES Key, MAC-Oriented AES Key, Repeatedly,
Interval, etc.
3) Click Confirm to save the change. The phone will check the server for a new
firmware in a specific time, and update automatically if there is a new firmware.
4) You can also update the firmware immediately by clicking Autoprovision Now.
To configure Auto Provision via phone user interface:
1) Press ->Settings->Advanced -> Auto Provision.
2) Enter the URL, User Name and Password.
5) Press to save the change or to cancel.
Decryption
This IP phone can support y000000000000.cfg and mac.cfg files encryption and
decryption for user authentication to realize security usage. If there are any encrypted
y000000000000.cfg or mac.cfg files on the server, uses can open the webpage of your
IP phone.
To configure AES Key via web user interface
1) Click on Phone->Auto Provision.
2) Enter the values in the Common AES Key and MAC-Oriented AES Key fields.
3) Click Confirm to decryption the files and upgrade to the new version
To configure AES Key via phone user interface:
1) Press ->Settings->Advanced.
2) Enter the password required, scroll to Set AES Key and then press .
3) Enter the common and the MAC-oriented AES keys in the Common and
MAC-oriented fields.
4) Press to save the change or to cancel.
To Next Page
Loading...
