Need help?Do you have a question about the XS Instruments COND 70 Vio and is the answer not in the manual?
General| Temperature Accuracy | ±0.5°C |
|---|---|
| Salinity Resolution | 0.1 ppt |
| Temperature Resolution | 0.1°C |
| Conductivity Accuracy | ±1% of reading |
| TDS Accuracy | ±1% of reading |
| Salinity Accuracy | ±1% of reading |
| Conductivity Resolution | 0.01 μS/cm |
| TDS Resolution | 0.01 g/L |
| Temperature Compensation | Automatic |
| Power | 4 x 1.5V AAA |
| Accuracy | ±1% of reading |
Explains warning terms and symbols used for safety communication.
Details specific terms like ATTENTION and WARNING to convey risk levels.
Explains power connection, powering on/off, and battery replacement.
Guides configuration of pH parameters and calibration procedures.
Covers calibration data, deadlines, reset options, and temperature calibration for pH.
Explains the step-by-step process for performing an automatic pH calibration.
Provides detailed instructions for performing automatic pH calibration with buffer solutions.
Guides calibration using custom values and taking pH measurements.
Details how to configure ORP measurement parameters and perform automatic calibration.
Covers setup options for conductivity, including cell constant selection.
Details the procedure for manual calibration of conductivity using custom values.
Guides the user on how to perform conductivity measurements after setup and calibration.
To Next Page
