XS Instruments pH 70 Plus User Manual

21
EN
P1.1 Select pH standard solution
P1.2 Set due calibration
P1.3 Check calibration date
P1.4 Select resolution
P1.5 Restore to factory setting
P1.6 Set stability criteria
P1.7 Temperature calibration
P2.1 Select electrode constant
P2.2 Select conductivity standard solution
P2.3 Set due calibration
P2.4 Check calibration date
P2.5 Select reference temp.
P2.6 Adjust temperature compensation coefficient
P2.8 Restore to factory setup
P2.9 Temperature calibration
P6.1 Select temperature unit
P6.2 Select backlight time
P6.3 Adjust timing storage time
P6.4 Adjust date
P6.5 Adjust time
P6.6 Parameters selection
P6.7 Clear stored value
P6.8 Automatic power-off setup
Submenu of pH parameter setting
P3.1 Adjust TDS factor
Main menu of parameter setting
Submenu of conductivity parameter setting
Submenu of TDS parameter setting
Submenu of basic parameter setting

XS Instruments pH 70 Plus Specifications

General

Brand	XS Instruments
Model	pH 70 Plus
Category	Measuring Instruments
Language	English