XS Instruments pH 70 Plus User Manual

4
EN
Introduction
Thanks for purchasing 70+ series portable pH/Conductivity meter.
This meter is perfect combination of the most advanced electronics, sensor technology and software
design, and is the most cost effective portable electrochemical meter suited for industrial and mining
enterprises, power plant, water treatment engineering, environmental protection industry, etc,
especially suited for application in field.
In order to use and maintain the instrument properly, please read the manual thoroughly before use.
To improve instrument performance constantly, we reserve the right to change the manual and
accessories without giving notice in advance.
Measurement parameters
Measurement parameters
pH70+DHS
COND70+
PC70+DHS
pH/mV
√
√
Conductivity/TDS/Salinity
√
√
Temperature
√
√
√
Basic features
• 3 Colors display for intuitive operations
• The microprocessor-based portable meter features automatic calibration, automatic
temperature compensation, function set-up, self-diagnostics, automatic power-off and low
voltage display.
• The meter’s digital filter improves measurement speed and accuracy. There is reading stability
display.
• The package includes portable case, meter, electrode, standard solutions and all accessories,
convenient to use in field.
• The meter is dust-proof and water-proof, meeting the IP57 rating.
• Temperature calibration function.
• Selection of parameters to be display (only for PC70+DHS)
• Meet GLP, clock display, manual storage and automatic timing storage, USB port for PC linking
and power supply
pH measurement features (suited for model pH70+DHS and PC70+DHS)
• 1-3 point automatic calibration, the meter provides calibration guide and automatic checking
function.
• The meter is able to recognize up to 8 types of pH standard buffer solutions. There are three
options of standard buffer solution: USA series, NIST series and customer solution set-up.
• The meter recognize DHS Sensor
Conductivity measurement features (suited for model COND70+ and PC70+DHS)
• 1-4 point automatic calibration, the meter provides calibration guide and automatic checking
function.
• The meter is able to recognize up to 4 types of conductivity standard solutions. There is
customer-defined solution set-up.
• TDS and salinity measurement

XS Instruments pH 70 Plus Specifications

General

Brand	XS Instruments
Model	pH 70 Plus
Category	Measuring Instruments
Language	English