2018/5/4V1.0+V1.0 12
3.3. Assembly steps
In case of danger, the machine assembly must be jointly carried out by two or
more people and do not assemble alone.
STEP 1
1 Use the magic belt attached to the left and right treadmill’s hand-stand pipes to tighten
the wires on both sides of the platform. Pass it through the square hole at the bottom
of the left and right treadmill’s hand-stand pipes and pull it above the pipe.
2 Fix the left and right treadmill’s hand-stand pipes (D, E) by screw (A), spring (b) and
washer (C) without fastening.
※ Please be careful not to clip the wire when assembling
To Next Page
Loading...
Need help?
General
