customerservice@dyaco.ca
DyacoCanadaInc2020
15
HOW TO ADJUST THE DRIVE BELT
If you can feel the pedals slip while you are pedaling, even when the resistance is adjusted to the
highest level, the drive belt may need to be adjusted. To adjust the drive belt, the Chain Cover
(29&51) must first be removed.
Loosen two france nut (A) and adjustor (B).
Turned to screws（C）of adjustor at clockwise or counterclockwise at same time to make belt have suitable
tension, also ensure two adjuster have same distance to axis.
Tighten two france nut (A) and adjuster(B).
B
C
C
B
To Next Page
Loading...
Need help?
General
