5.6 THROTTLE
Throttle Position Sensor (TPS) Match, this function enables you to make initial settings to
throttle actuators and returns the “learned” values stored on ECU to the default state.
Doing so can accurately control the actions of regulating throttle (or idle engine) to adjust
the amount of air intake.
The operation guidelines of the Throttle function are shown as below:
1. Enter the Throttle menu and choose relevant models according to the vehicle being
tested.
2. Enter the Auto Recognition menu and turn on the ignition switch.
3. Read carefully and complete the requisites listed before performing the throttle
regeneration function. And press OK after completing the instructions shown.
Figure 5-20 Sample of throttle function (screen 1)
To Next Page
Loading...
