AutoProPAD Basic Key Programmer
12
4.2.2. Toolbar function buttons descriptions
Function Buttons Descriptions
Return to previous interface
Print test data
Select icon to record the data log then select the icon again to
send your feedback to XTOOL service center via Wi-Fi
After selecting the data record icon for the second time the data feedback page will
appear as shown below, showing diagnostic software version, vehicle being tested, and the
steps performed in the diagnostic process. Users can then enter the nature of the problem
and any other relevant information then send the form to the Xtool engineering department
via Wi-Fi.
To Next Page
Loading...
Need help?
General
