AutoProPAD Basic Key Programmer
2
Xtool AutoProPAD Basic User Manual Instructions
Please read this user manual carefully before using the scanner.
When reading the manual, please pay special attention to the words “Note”, “Caution”
or “Warning”, read them carefully for appropriate operation.
Xtool AutoProPAD Basic Key Programmer System Main Unit
Maintenance
Avoid shaking or dismantling the unit as it may damage the internal components.
Do not use hard or sharp objects to touch the LCD screen.
Do not use any excessive force.
Do not expose the screen to strong sunlight for a long period.
Caution: Keep it away from water, moisture, high temperature, or very low temperature.
Keep the main unit away from strong magnetic fields.
Operation Instructions
For safe operation, please follow the instructions below:
Keep the scanner away from heat or fumes when using it.
If the vehicle battery contains acid, please avoid any skin contact and keep fire sources
away from the battery during testing.
Exhaust gas of vehicle contains harmful chemicals, please ensure adequate ventilation.
Do not touch the cooling system components or exhaust manifolds when engine is
running due to the high temperatures.
Make sure parking brake is engaged, Vehicle is in Neutral or Park to prevent the vehicle
from moving when engine starts.
Make sure the (DLC) diagnostic link connector is functioning and connected properly
before starting the test to avoid damage to any of the ECUs.
Do not switch off the power or unplug the connectors during testing, otherwise you
may damage the ECUs.
To Next Page
Loading...
Need help?
General
