Xtool Key & Chip KC501 - Read Remote Frequency; Read Transponder ID & Chip Type

9
READ REMOTE FREQUENCY
KC501 allows you to recognize the frequency of the remotes. To
do that, please do as follows:
1) Connect KC501 to any of the power supplies.
2) Insert the key into the slot (remote signal-radiation
side down).
3) Press “FR” button on the KC501.
4) Press any of the buttons on the key.
5) The readings will be shown on the screen.
READ TRANSPONDER ID & CHIP TYPE
KC501 allows you to read transponder ID and chip type of the key.
To do that, please do as follows:
1) Connect KC501 to any of the power supplies.
2) Insert the key into the slot.
3) Press “TR” button on the key.
4) The readings will be shown on the screen.