EEPROM READING & WRITING
INSTALLING EEPROM CHIP
There are multiple ways to install EEPROM chip. Different
methods require different accessories.
1) Install EEPROM directly
a. Switch the locker up to unlock the slot lock.
b. Put the EEPROM chip inside the slot. Remember to
recognize the pin 1 on the chip and place the pin on the
right-bottom corner of the slot.
c. Switch the locker down to hold the chip in place.
This is only supported on large-sized EEPROM chips.
Make sure the chip is holding firmly to the slot.
To Next Page
Loading...
Need help?
General
