Xtool Key & Chip KC501 User Manual

8
2 HOW TO USE
PROGRAM KEYS & EMULATORS
KC501 is needed for some of the key programming process on
Xtool devices (see support list). When it is needed, the device will
pop up a notification and tell you to connect KC501. Please find
the USB3.0 to USB-B cable and connect it to Xtool devices. The
key programming software will tell you the following process.
 When you’re using KC501 to your tablet for the first time it will tell you to bind the
device to the tablet. If you want to use the device on another tablet after that,
please find a PC or laptop, and contact your dealer or Xtool aftersales services.

Xtool Key & Chip KC501 Specifications

General

Brand	Xtool
Model	Key & Chip KC501
Category	Motherboard
Language	English