Xtralis ICAM IFT-4 User Manual

ICAM
Commissioning Guide
May 2018
Document: 14972_02
Part Number: 29303

Xtralis ICAM IFT-4 Specifications

General

Type	Aspirating Smoke Detector
Model	ICAM IFT-4
Detection Principle	Light Scattering
Number of sampling pipes	4
Power Supply	24 VDC
Operating Voltage	18-30 VDC
Humidity Range	10% to 95% RH, non-condensing
IP Rating	IP30
Detection Method	Aspiration
Detection Technology	Laser
Alarm Sensitivity Range	0.001% to 20.0% obs/m
Alarm Threshold	Configurable
Response Time	Adjustable
Current Consumption	350 mA @ 24 VDC
Operating Temperature	-10°C to 55°C
Relay Outputs	3 programmable relays
Communication Ports	RS-485
Certifications	EN 54-20

Summary

Pre-Commissioning

3.3.1 Checking Cabling and Initial Powerup

Verifies cabling and initial system power-on procedures.

3.3.2 Preliminary Systems Check

Outlines preliminary system checks using Xtralis VSC software.

System Configuration and Setting Thresholds

4.1 IFT Detector Configuration

Details key functions and access codes for IFT detector configuration.

4.1.1 IFT Detector Programmable Functions

4.2 ILS Detector Configuration

4.2.1 ILS Detector Programmable Functions

4.3 IAS Detector Configuration

4.3.1 IAS Detector Programmable Functions

System Integrity Test

5.1 Performance-based Smoke Testing

Explains methods for proving pipe integrity and measuring response time.

5.1.2 Pipe Integrity Smoke Testing

5.1.3 Smoke Pellet Testing

5.1.4 Polyurethane Mat Smoke Testing

5.1.5 Wire Burn Smoke Testing

Details test method simulating fire stages using overloaded wire.

Hand Over