39
of the daylight saving period.
- Select BEGIN or END using the control button (◀ ▲ ▶ ▼) and
press the SEL button.
- Select the item using the control button (◀ ▲ ▶ ▼), select the
setting value using the control button (◀ ▲ ▶ ▼) and press the
ESC button to return to SET DATE & TIME setup menu.
CAUTION:
- Do not set the start time to 23:00 for DLS.
- DLS can’t be applied if the date of BEGIN and END is the same.
CLIENT ACCESS
Enable/Disable remote access through network client software.
NTP NTP is an abbreviation for Network Time Protocol, which is for synchronizing the
clocks of computer systems over variable-latency data networks.
PRIMARY SNTP SERVER: Input the address of the primary NTP time
server.
SECONDARY SNTP SERVER: Input the address of the secondary
NTP time server.
TIME ZONE: Greenwich Mean Time(GMT) is a term originally referring to
mean solar time at the Royal Observatory, Greenwich in
London. Because NTP synchronizes with Greenwich Mean
Time(GMT) regardless of geography, users must set their
own time difference. (Ex.KOREA GMT+09:00)
CONNECTON MODE: Select NTP time server connection mode.
INTERVAL: Synchronize the clock by hours which is set on the
connection period menu.
TIME: Synchronize the clock at the time daily which is set on the
connection period menu.
CONNECTION PERIOD: 1~24
SEND EMAIL Enable/disable the send e-mail function.(ON/OFF)
To Next Page
Loading...
Need help?
General
