1-5 ACCOUNT SETUP
The Account Setup menu is used to provide a maximum of 4 users’ individual and unique
access to the DVR over a network setup. The default administrator account username and
password is ‘admin’ and ‘123456’.
Please Note: The default password remains the same after firmware upgrade
Select checkbox to activate the chosen user account.
Set up password for each user. Password requires 8-digits which can
be a mixture of letters and numbers (passwords are case-sensitive)
Set up permissions/rights for each user
Select to change administrator’s password
Select to change/set a user’s picture
1-5.1 Permission Setup
The permission setup is used to provide individual users (maximum of 4 users) tailored access
to the DVR’s functions. The administrator can select the relevant checkboxes (as detailed below)
to give access to the Setup Menu, Network Operations, PTZ function, Playback, Utility, Backup.
Access the password expiry dates and Masks on specific channels while playing back can also
be specified.
To Next Page
Loading...
Need help?
General
