Enable E-mail Notification
Select checkbox to enable/disable E-mail Notification function.
Enter to set up SMTP Server name.
Select specific Port (if required).
Enter to set up User Name.
Enter to set up Password.
Enter to set up e-mail address of receivers (up to 10 addresses can
be set).
Enter to select which events (Motion, Sensor and Vloss (Video Loss)
will be emailed notifications.
Enter to set up e-mail addresses for up to 10 receivers individually.
1-7 PTZ & RS485 SETUP
The DVR allows users to control PTZ functions of your camera. Please ensure that the PTZ
camera is connected correctly to the RS-485 port of DVR.
Click the box to Enable/Disable PTZ function for each channel.
Set up the protocol of PTZ cam. The supported protocols are
PELCO-P, PELCO-D, KND, LI-LIN, SAMSUNG, LG, AVTECH.
Select ◀ ▶ to set up PTZ ID (The ID range is from 1 to 64)
Select Baud Rate for PTZ from 2400, 4800, 9600,19200
Select RS-485 ID (values from 1 to 64)
Select RS-485 Baud Rate from 2400. 4800, 9600,19200
Select Keyboard for use with the PTZ camera
To Next Page
Loading...
Need help?
General
