Need help?Do you have a question about the Xylem McDonnell & Miller 150S Series and is the answer not in the manual?
General| Model | 150S Series |
|---|---|
| Voltage Rating | 120/240 VAC, 24 VDC |
| Maximum Water Pressure | 150 psi |
| Connection Size | 1/2" NPT |
| Operating Temperature | 32°F to 200°F (0°C to 93°C) |
| Temperature Range | 32°F to 200°F (0°C to 93°C) |
| Mounting | Vertical |
Lists various McDonnell & Miller snap switch models for replacement.
Critical safety precautions for handling and installation of the product.
Details electrical ratings and NEMA enclosure type for the product.
Specifies pressure settings and differential values for various models.
Outlines the initial preparation steps before installing the mechanism.
Highlights critical safety warnings and cautions during installation.
Step-by-step guide for physically installing the new head mechanism.
Instructions for correctly connecting the electrical wiring for the mechanism.
Illustrates switch operation for different McDonnell & Miller models.
Provides various wiring diagrams for different control configurations.
Steps to test the installed mechanism to ensure proper operation.
Outlines the recommended schedule for control maintenance and relevant notes.
Detailed steps for safely performing the blow down procedure.
Outlines the terms and conditions of commercial and consumer warranties.
To Next Page