Contact your supervisor to obtain the applicable product configuration.
3. The Choose Port Configuration screen displays. Select the button corresponding
with your applicable port configuration.
Note: The port configuration names listed will vary depending on the
product configuration in use. You should ask your supervisor (or Sensus
representative) for guidance on the applicable port configuration to choose.
4. Similarly, if configuring a dual port SmartPoint module (with BOTH ports enabled),
you are prompted to select a configuration for each port by the Choose Port 1
Configuration and Choose Port 2 Configuration screens.
6 Two-way SmartPoint modules | 34
To Next Page
Loading...
Need help?
General
