1.4.2.3 Activation of the radio interface
a) NTC interface - via Elvaco OTC App
b) Optical interface - via the Sensus configuration software Device Monitor
c) Via the heat meter menu;
1.4.2.4 Connection to the LoRaWAN Network
1.5 Three additional pulse inputs (optional; only in conjunction with M-Bus or radio)
General information about pulse inputs:
It is important to note that the acknowledged state of the art technology rules and the relevant legal restraints
(international and local; see “Relevant Norms / Standards / Literature Pulse Inputs”) are to be observed.
The installation has to be performed by authorized, skilled persons.
1.5.1 Relevant norms / standards / literature pulse inputs
To Next Page
Loading...
