EN 10 EN 11
The projector's home page is as follow.
Select the desired input signal source (USB/ HDMI) on the home-page.
Note: If you connect the external device ( Such as TV box, Fire TV Stick,
DVD Player, USB flash disk, Computer ect.) , please must select the
corresponding signal source. If you choose wrong, the projector will show
no signal.
Step1: Insert the USB flash disk into the USB port of the projector.
Step2: Select “Media” and the press the "OK" key to enter.
Step3: Depending on the file type, select the option [MOVIE/MUSIC/
PHOTO/TEXT]
Step4: Select the desired file in the USB disk (or enter the sub-folder folder),
and then press the [OK] button to play it.
Warm Tips: If the projector cannot recognize the USB disk, please refer
to the following methods to solve the problem.
Please confirm whether your USB disk meets the following formats.
1. FAT32: 8G/16G/32G
2. NTFS: 64G
If it is not, please format the USB disk. Before you format the USB disk, if
you have anything on your USB disk, make sure to backup everything. After
these steps, everything will be lost forever.
How to convert USB disk format to FAT32 format?
1. Plug-in your usb disk into the computer’s USB port.
1. Select The Input Signal Source
2. Multimedia Play
2.1 USB Disk Input Mode
SETTING UP THE PROJECTOR
To Next Page
Loading...
Need help?
General
