EN 14 EN 15
2. Back to home page -- Select [ Airplay ] menu -- Press the OK button to
enter the [ Airplay ] menu.
3.Select the [Settings] menu on your iOS device -- Turn on the [Wi-Fi]
function -- Connect your iOS device to the same home network as the
projector.
4.Open the [ Control Center ] on your iOS device -- Select the [ Screen
Mirroring ] function -- Select and connect the iOS Cast receiver named
[ E1-Airplay-XXXX ] -- your iOS device screen will be displayed on the
projection screen after 3 seconds.
3.2 Miracast ( for Android Devices )
1. Go to home page -- Select the [ Miracast ] -- Press the OK button to
enter the Miracast setting menu.
2. Select the [ Settings ] menu on your Android device -- Select the [
Screen mirroring ] function -- Select your Miracast receiver named [ E1-
Miracast-XXXX ] -- your Android device screen will be displayed on the
projection screen after 3 seconds.
3.On your Android device, tap [Settings] -[ WLAN Display ] -Turn [ Wi-Fi ]
ON, Connect your home WiFi.
Note:
1.Different brands of Android phones have different operations for
select Screen Mirroring Display, please refer to your phone’s manual. [
Multi screen/Wireless display/WLAN display/Screen mirroring/Wireless
projection/Smart view etc. ]
2.Not all Android phones support this function. Please make sure it is
supported before use.
E1-Miracast-XXXX
E1-Miracast-XXXX
To Next Page
Loading...
